INPUT

The AV-56WP30 or AV-48WP30 can receive signals from a variety
of sources. Use the INPUT button to select the signal source:
Antenna (for signals from the RF coaxial cable) or VIDEO 1
through VIDEO 4 (for signals from an audio/video device like a
DVD player or VCR) or DIGITAL-IN.
The INPUT menu will appear when you press INPUT. To select a
signal source, press INPUT, each press will move to the next item in
the menu. If no device is connected to an input, a grey screen will
appear. When you have selected a signal source, either press EXIT
to leave the menu or wait a few seconds for the menu to disappear
automatically.
• Pressing CH+/- will automatically select the antenna (12) as the
source.
Button Functions
INPUT12 VIDEO-1VIDEO-2VIDEO-3 VIDEO-4 DIGITAL-IN
INPUT Menu

LIGHT

The remote control includes illuminated buttons for key features like CH+/- and VOL+/-. Press
the LIGHT button to turn the illumination on. The illumination will shut off automatically after a
few seconds.
58

MENU (on TV’s Front Panel)

You can also access the onscreen menu system by pressing the MENUbutton on the
television’s front panel. When you press this button, an additional onscreen menu will appear.
This menu will show you the current channel (07 on the menu shown above), the current signal
input in use.
You can move to the other onscreen menus by pressing the
arrow.
FRONT PANEL CONTROL
NEXT PAGE
OPERATE BY FRONT KEY
SELECT
CHANNEL 07
BY FRONT KEY
INPUT TV