E-28
Settings & Controls for Recording
Preparing a Disc for Recording
This DVD recorder is capable of recording to DVD-R/DVD-RW (in video mode) and DVD+R/DVD+RW.
DVD-R : Only discs that conform with DVD-R Standard 2.0 (video mode) can be used.
DVD-RW : Discs of Version 1.1 or later can be used.
Although Version 1.1 of DVD-RW standards allows the selection of video mode and VR mode for recording, this
DVD recorder performs recording in video mode only.
*Version 1.0 of the DVD-RW standards does not support video-mode recording, and for this reason, the corre-
sponding discs cannot be used.
In terms of recording characteristics, DVD-R/DVD+R and DVD-RW (video mode)/DVD+RW differ as follows.
DVD-R/DVD+R : Each disc can be recorded only once. Erasing of data and re-recording are not possible.
DVD-RW (video mode)/DVD+RW (compliance with video mode) :
After viewing a disc, all data can be erased and it can be used to record new content.
The condition of the disc being used will dictate the available recording options as follows.
Notes
•If data has been erased from a disc using a different DVD recorder, it may not be possible to record new content to it using
this recorder. To avoid this type of situation, ensure that this DVD recorder is used to erase recorded data.
•New content cannot be recorded to discs that have been finalized.
•It is possible to cancel the finalization and add a recording to a DVD-RW/DVD+RW finalized on this machine.
•Regardless of whether or not finalization ha s been carried out, it will not be possible to use this DV D recorder to record new
content to a disc that has been recorded on using other devices.
Disc condition Recording operations
DVD-R
DVD+R
Blank disc New content can be recorded. A new title is created and
recording starts from that title’s first chapter.
A disc recorded on using this DVD recorder but
not yet finalized.
A new title is created in the unused section of the disc, and
recording starts from that title’s first chapter.
DVD-RW
DVD+RW
Blank disc New content can be recorded. A new title is created and
recording starts from that title’s first chapter.
A disc recorded on using this DVD recorder but
not yet finalized.
A new title is created in the unused section of the disc, and
recording starts from that title’s first chapter.
A recorded disc from which data is to be erased. Erase the recorded data (as described below), and then
record new content.