JVC BD-X201MS Recording with the Front Panel (continued)

E-40

Recording

Recording with the Front Panel (continued)

Inserting Chapter Marks Manually or Automatically

Using the Foot Switch to Perform Recording

Operations such as recording and writing chapter marks (indexes) can be performed using the external switch that is connected

to the foot switch terminal at the rear of this unit.

•Use the FOOT SW1 terminal to turn ON/OFF recording. The FOOT SW1 item on the REMOTE (1/2) menu screen can be used

to specify whether to use the FOOT SW1 terminal as well as to specify conditions for using the terminal. (XPage75)

•Use the FOOT SW2 terminal to write chapter marks (indexes) or to capture a still picture (JPEG). The FOOT SW2 item on the

REMOTE (1/2) menu screen can be used to specify whether to use the FOOT SW2 terminal as well as to specify conditions for

using the terminal. (XPage75)

6.End recording and remove the disc.

Depending on how the disc will be used, one of two d ifferent procedures is

implemented at this time.

• If more content will be recorded to the disc using this DVD recorder:

Simply press the OPEN/CLOSE button and remove the disc. (Do not final-

ize the disc before it is removed.)

*The AUTO FINALIZE item on the DISC menu screen will have to be set to

OFF.

• If the disc is to be played on a different DVD player:

Finalize the disc, press the OPEN/CLOSE button, and then remove the

disc.

For more details regarding finalizing, refer to page 42.

It is possible to insert a chapter mark either manually or automatically.

Indexes are written together with chapter marks.

The actual method to be used is determined by CHAPTER CREATION and

SET INTERVAL from the RECORDER MENU (1/2) screen.

•If chapter marks are to be inserted manually at any point, set CHAPTER

CREATION to MANUAL.

Chapter marks and indexes can then be inserted by pressing the REC but-

ton while recording.

•If chapter marks are to be inserted automatically, first of all set CHAPTER

CREATION to AUTO. Then use SET INTERVAL to set a time (in minutes)

for chapter mark insertion.

The DVD recorder will insert chapter marks and indexes at the correspond-

ing intervals during recording.

Whether a chapter mark is automatically inserted or not during a recording

pause is set with the AUTO CHAPTER (REC PAUSE) item.

ON: Insert a chapter mark.

OFF: Do not insert a chapter mark.

Notes

• When the INDEX CREATION item on the RECORDER MENU (2/2) screen is

set to AUTO, indexes will be inserted together with chapters at the record

start point and recording pause point.

• The frame at which a chapter mark is i nserted will be used for the corre-

sponding thumbnail in the chapter menu. When EDIT MENU from the DVD

MENU screen is set to ENABLE, the frames used for thumbnails can be

modified on the THUMBNAIL EDIT screen that appears automatically at the

end of recording.

• Each title can contain up to 99 chapters.

• In certain cases, the frames used for chapte r menu thumbnails may differ

slightly from the exact frames at which the corresponding chapter marks

were inserted.

When recording is stopped or a title is

closed, the “PLEASE WAIT” message will

be displayed on the monitor.

CHAPTER CREATION MANUAL

SET INTERVAL

Every05Min

AUTO CHAPTER (RECPAUSE) ON

ENCODE QUALITY SP

AUDIO ENCODE DOLBY DIGITAL

RECORDER MENU (1/2)

RECORDER MENU (1/2) screen