E-67
Setup Menu
INPUT SELECT MENU Screen
The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
SYSTEM MENU Screen
The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
SYSTEM MENU (1/2) screen
Parameter Possible settings Description
INPUT SELECT LINE
[Y/C]
DV
This parameter is used to select the audio and video input signals.
LINE : The composite video signal from the VIDEO LINE IN terminal and the analog au-
dio signals from the AUDIO IN terminals are to be used.
Y/C : The YC separate signal from the Y/C IN terminal and the analog audio signals from
the AUDIO IN terminals are to be used.
DV : The digital video and audio signals from the DV IN/OUT terminal are to be used.
* The front-panel indicator corresponding to the type of input signal selected on this screen will
light up or start to flash.
Setting of this parameter will not be possible when REMOTE SELECT from the REMOTE MENU
screen has been set to DV(SLAVE), or DV(TRIGGER). DV signals will be used for input at these
times.
INPUT LINE
[Y/C]
dV
MENU This button is used to return to the Setup Menu screen.
MENU
Parameter Possible settings Description
AUTO REW OFF
[ON]
ON-QUICK
This parameter is used to select whether to use the AUTO REW function.
AUTO REW function: When playback reaches the end position of the last title, the stop position
is the beginning of the first title.
* This item is only enabled if PLAYBACK & 232C of the SYSTEM MENU (1/2) screen is set to VTR.
* This item is only enabled when using a disc that has not been finalized or when PLAYBACK NAV-
IGATION of the SYSTEM MENU (2/2) screen is set to OFF.
OFF : The AUTO REW function is disabled. When playback reaches the end position of
the last title, the stop position is three seconds prior to the end position.
ON : The AUTO REW function is enabled. When this setting is set, the counter is re-
turned to the initial indication in the same manner as if the rewind operation was
performed for a VTR.
ON-QUICK: The AUTO REW function is enabled.
A REW oFF
[oN]
oN-q
SETUP [OFF]
ON
This parameter is used to indicate whether or not a setup signal is to be added to analog video
(i.e., composite or YC separate) during the recording process. The actual setting depends on
whether the input analog signal contains a setup signal. (NTSC only)
OFF : This setting should be made when the input analog signal does not contain a setup
signal.
ON : This setting should be made when the input analog signal contains a setup signal.
SETUP [oFF]
oN
TEST SIGNAL [OFF]
ON
This parameter is used to indicate whether or not the color bar output by the DVD recorder’s
internal signal generator is to be displayed.
OFF : The color bar is not displayed and video from t he VIDEO LINE IN terminal is output
to the monitor.
ON : The color bar is displayed. Use this setting when the color bar is to be re corded.
TEST S [oFF]
oN
KEYBOARD
STYLE
[ENGLISH]
FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
This parameter is set when using a USB keyboard, and its purpose is to indicate the keyboard’s
layout (or language) as one of the following.
ENGLISH
FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
Note
The system must be restarted after this parameter is changed.
KboARd [ENG]
FRN
ITL
GER
ESP
JPN