E-75
Setup Menu
REMOTE MENU Screen
The following table identifies and describes the parameters that may be set using the REMOTE MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
REMOTE MENU (1/2) screen
Parameter Possible settings Description
REMOTE SELECT [OFF]
DV(SLAVE)
DV(TRIGGER)
This parameter is used to select a method for controlling external devices connected via the DV
IN/OUT terminal.
OFF : Control is not to be carried out via the DV IN/OUT terminal. This is the stan-
dard setting for normal operation.
DV (SLAVE) : This DVD recorder will become the slave device and will be controlled by
the master device.
DV(TRIGGER) :This setting is made when this DVD recorder is connec ted to a DV camera
featuring a DV record triggering function, and it allows this DVD recorder to
record video from the camera in response to operation of its trigger button.
REMoTE [oFF]
dVS
dVT
FOOT SW1 [OFF]
LOW EDGE
HIGH EDGE
LOW LEVEL
Set this item when connecting an external switch (foot switch, etc.) to the FOOT SW1 terminal.
OFF : Set to this when an external switch is not used
LOW EDGE : Switch between recording and record pause actions using the low edge of
external switch signals.
HIGH EDGE : Switch between recording and record pause actions using the high edge of
external switch signals.
LOW LEVEL : Use the low level and high level of external switch signals for recording and
record pause respectively.
FSW1 [oFF]
LE
HE
LL
FOOT SW2 [OFF]
LOW EDGE
HIGH EDGE
BOTH EDGE
Set this item when connecting an external switch (foot switch, etc.) to the FOOT SW2 terminal.
OFF : Set to this when an external switch is not used
LOW EDGE : Add chapter marks and indexes using the low edge of external switch sig-
nals. Also, capture still images (JPEG) to the internal memory of the DVD
recorder.
HIGH EDGE : Add chapter marks and indexes using the high edge of external switch sig-
nals. Also, capture still images (JPEG) to the internal memory of the DVD
recorder.
BOTH EDGE : Add chapter marks and indexes using the low and high edges of external
switch signals. Also, capture still images (JPEG) to the internal memory of
the DVD recorder.
FSW2 [oFF]
LE
HE
bE
232C BAUDRATE [9600]
19200
For setting the communication speed of the RS-232C terminal.
9600 : Communicate at a rate of 9600 bps
19200 : Communicate at a rate of 19200 bps
bPS [96]
192
232C
PROTCOL TYPE
[TYPE1]
to
TYPE8
This item does not work for the DVD recorder.
232C [T1]
to
T8
rThis button is used to display the REMOTE MENU (2/2) screen.
REM2
MENU This button is used to return to the Setup Menu screen.
MENU