E-37
–––MENU–––
SYSTEM..
REMOTE. .
AUDIO/ VIDEO . .
TIMECODE..
DISPLAY SET..
CLOCK ADJUST . .
FACTORY SETTING CANCEL
DRUM HOUR METER 000000
EXIT
Top MENU
–––TIME CODE–––
TC 00:00:00:00
CLEAR CANCEL
NDF/ DF ( N TSC ) DROP
TC DUPLI CATE OFF
TC ADJUST( DV ) OFF
PAGE BACK
Time Code
Hour Second
Minute Frame
Framing mode
(NTSC only)
TIME CODE menu
1.
Display the top MENU.
Main unit
Press the EJECT button for at
least 2 seconds.
Remote controller
Press the MENU button.
Memo
If the REC button is held down in the STOP mode when the TC DUPLICATE item is set to AUTO or NON DROP,
the EE signals of the time codes from the DV input terminal can be checked.
Resetting the time code
to zero:
1Select the CLEAR menu
item.
2Set the value to EXECUTE
and press the SET button
(remote controller) or the
PAUSE button (Main unit).
Memo
Framing mode (NTSC only)
DROP
:Time codes that
match the actual
time.
NON DROP
: Use this setting if the
number of frames is
important.
2.
Display the TIME CODE menu.
Main unit
Select the TIME CODE item
with the PLAY/STOP button
and press the PAUSE or FF
button.
Remote controller
Select the TIME CODE item
with the / button and
press the SET or button.
3.
Preset the time code (hour, minute, second and frame).
Main unit
1Select the TIME CODE item
with the PLAY/STOP button
and press the PAUSE or FF
button.
2Press the FF or REW but-
ton to shift to the next digit
segment.
3Press the PLAY/STOP but-
ton to change the value of
the blinking digits.
4Repeat 2 and 3 steps
above and set all the values.
Press the PAUSE button.
Remote controller
1Select the TC item with the
/ button and press the
SET or button.
¥ The hour digits blink.
2Press the / button to
shift to the next digit seg-
ment.
3Press the / button to
change the value of the
blinking digits.
4Repeat steps 2 and 3
above and set all the val-
ues. Press the SET button.
4.
Set the framing mode (NON DROP / DROP) ... (NTSC only)
Main unit
1Select the NDF/DF item with
the PLAY/STOP button and
press the SET or FF button.
2Press the PLAY/STOP but-
ton to select the value.
3Press the PAUSE button to
confirm the setting.
Remote controller
1Select the NDF/DF item
with the / button and
press the SET or button.
2Press the / button to
select the value.
3Press the SET button to
confirm the setting value.
5.
Return to the usual screen.
Main unit
Press the EJECT button.
Remote controller
Press the MENU button.
Recording time codes of a DV input terminal:
•Set the TC DUPLICATE item of the TIME CODE menu to AUTO.
•To record time codes in the non-drop frame mode from BR-DV600, GY-DV500 or GY-DV700W,
set the TC DUPLICATE setting to NON DROP.