10
3Operation buttons
[A. DUB] Audio dubbing button/LED
•Press this button for audio dubbing (after-re-
cording).
For audio dubbing, set AUDIO MODE in the
AUDIO MENU screen to “32K”.
The sound produced by the MIC terminal #
or the AUDIO IN terminal is recorded on chan-
nels CH3 and CH4.
•During audio dubbing, the red A. DUB LED
lights up.
•If the INPUT SELECT switch is set to DV,
audio dubbing cannot be performed.
(☞ Page 44 “Audio Dubbing”)
[REC] button/LED
•Hold down this button and press the PLAY
button to start recording. During recording,
the red LED lights up.
•Hold down this button and press the PAUSE
button to pause recording.
•If this button is pressed during recording, an
index signal is recorded on the tape (when
INDEX WRITE in the SYSTEM MENU screen
is set to ON).
•When this button is pressed in the STOP
mode, the time code generator value can be
checked while the button is being held down.
If TC DUPLICATE Menu is set to AUTO or
NON DROP, the time code, date and time of
the DV input can be checked.
•If this button is pressed during playback, the
input signal can be checked while the button
is held down. (EE check)
EE check is not available for DV signal input.
Memo
●If DC IN MODE in the SYSTEM MENU screen
is set to “OPE ON” or the Timer Switch is set
to “REC” or “PLAY” and power is supplied to
the DC IN terminal located on the rear panel,
BR-DV6000 goes into the OPERATE ON
state even if this button is not pressed.
●Even after the power is turned off with this
button, BR-DV6000 is live with a small amount
of electricity.
Therefore, if BR-DV6000 is not to be used
for a long period of time, please remove the
AC adapter to save energy.
1Cassette loading slot/LED
•For loading a cassette into or unloading it from
the slot.
Insert a standard DV cassette or a mini DV
cassette. (☞ Page 38)
•When BR-DV6000 is in the OPERATE OFF
state and a cassette is loaded, it changes to
the OPERATE ON state.
•With a cassette loaded, the LED lights up in
green.
When a cassette is being loaded or ejected,
the LED flashes.
2[OPERATE] button/LED
•Press this button to turn on the power and
BR-DV6000 becomes ready for operation.
(Operate ON)
Press this button again when BR-DV6000 is
already on to turn off the power.
(Operate OFF)
•OPERATE LED lights up as follows.
Operate ON : the green LED lights up
Operate OFF : the red LED lights up
VCR error : the red LED blinks
NAMES AND FUNCTIONS
OF PARTS – Front panel –
BR-DV6000
PROFESSIONAL
MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
1
2
3
DV6000U_02-027_Eng.p65e 06/03/03, 11:38 PM10