90
Search speed table (Supported speed only)
321 0
000 0
000 1
001 0
001 1
010 1
011 0
011 1
100 0
100 1
STILL
0.1
0.2
0.3
010 00.5
1
2
5
9 (10)
20
RS-232C INTERFACE – RS-232C commands – (continued)
D7: STATUS SENSE
This section describes 5-byte data that are re-
turned when the STATUS SENSE (D7H) com-
mand is sent.
7Always 1
6Always 0
5 SHORT FF/REW : In short FF or short REW
4REC INHIBIT :Recording prohibited
3CASSETTE OUT :No cassette tape loaded
2SERO LOCK :Servo locked
1Undefined :Always 0
0ERROR :Error occurring
● First byte
7VIDEO EE :Video output in the EE mode
6AUD EE :Audio 1 output in the EE mode
5 VIDEO MUTE :Video signals muted
4AUD MUTE :Audio signals muted
3WARNING :Problem with the VCR
2DEW :Condensation in the VCR
1TAPE BEGIN :Short FF at the tape beginning.
0TAPE END : Short REW at the tape end
● Second byte
7TIMER PLAY :TIMER switch set to PLAY
6TIMER REC :TIMER switch set to REC
5Unused : Always 0
4REPEAT :REPEAT PLAYBACK mode ON
3Unused : Always 0
2REPEAT MODE :Repeat playback in operation
1SEARCH MODE : VCR being cueing-up/prerolling
0Unused : Always 0
● Third byte
7PLAY MODE :VCR playing
6FF MODE :VCR fast-forwarding
5REW MODE : VCR rewinding
4STOP MODE :VCR stopped
3STAND BY MODE :VCR on standby
2EJECT :Cassette tape being ejected
1REC MODE :VCR recording
0ADB MODE :VCR audio dubbing
● Fourth byte
7PAUSE MODE :VCR paused
6Unused : Always 0
5SHUTTLE FWD : VCR forward shuttle-searching
4SHUTTLE REV :VCR reverse shuttle-searching
3SPEED CODE3 : Refer to the following table.
2SPEED CODE2 : Refer to the following table.
1SPEED CODE1 : Refer to the following table.
0SPEED CODE0 : Refer to the following table.
● Fifth byte
Search speed
Bit No. Status: If the bit is 1
Bit No. Status: If the bit is 1
Bit No. Status: If the bit is 1
Bit No. Status: If the bit is 1
Bit No. Status: If the bit is 1
Speed code (Bit No.)
( ): PAL
DV6000U_72-104_Eng.p65e 06/03/03, 11:42 PM90