Remote controller
3.2.
PAUSE button REC button
2. 4. | A.DUB | PAUSE | REC |
|
|
| |
PLAY | F.REV | PLAY | F.ADV |
|
| ||
button |
|
|
|
| REW |
| FF |
5. |
| STOP |
|
|
|
| |
STOP | INDEX– |
| INDEX+ |
|
|
|
REMOTE CONTROL UNIT
button |
Memo
•If recording has been paused for an extended period of time, the unit will automatically go into the STOP mode to pro- tect the tape. The time period after the lapse of which the unit will enter the STOP mode can be configured via the LONG PAUSE TIME item of the SYSTEM (1/2) menu.
•This unit cannot perform editing functions.
Memo
If recording is executed right after the RECORDING PAUSE state, index signals will not be re- corded.
Main unit
|
| 2. | 2. 4. |
| |
|
| REC | PLAY |
| |
|
| button | button |
| |
OPERATE |
|
|
| EJECT |
|
|
|
|
|
| |
|
|
|
| MENIU |
|
Mini | A.DUB | REC | PLAY | PAUSE |
|
|
| DVCAM NTSC PAL REC INH. |
|
| 3. |
PROFESSIONAL |
|
|
| ||
|
|
| SET | PAUSE | |
MIC REMOTE SEL. | INPUT SEL. | REW | STOP | FF | |
SERIAL | LINE |
|
| button | |
9PIN WIRELESS | DV Y/C |
|
|
| |
|
|
| |||
|
|
|
|
|
5. STOP button
1. Load the cassette.
•Before loading the cassette, please check that the rear slide of the cassette is pushed to REC.
¥The Main unit is powered on.
2.Start recording.
•Hold down the REC button and press the PLAY button.
3.Pause recording.
•Press the PAUSE button.
4.Resume recording.
•Press the PLAY button.
5.Stop recording.
•Press the STOP button.
Recording index signalsWhen the INDEX WRITE item of the SYSTEM (1/2) menu is set as ON, an index signal is recorded at the starting position of recording.
In the PLAYBACK mode, the position where the index signal is recorded can be detected. (Index search)
During recording, please press the REC button to record the index signal.
*Please allow at least an interval of 1 minute between recording of index signals.
Recording of index signals after tape recording is not possible.