By linking this unit to other DV devices, this unit can perform continuous,
Backup unit: the main unit
|
| OPERATE |
|
|
|
|
| EJECT |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| MENIU |
|
| Mini |
| A.DUB |
| REC | PLAY | PAUSE |
|
|
|
|
| DVCAM NTSC PAL | REC INH. |
|
|
DV cable |
| PROFESSIONAL |
|
|
|
|
| |
| SERIAL | LINE | REW | STOP | SET | |||
| FF | |||||||
|
| MIC REMOTE SEL. | INPUT SEL. |
| ||||
DV terminal | DV terminal | 9PIN | WIRELESS | DV Y/C |
|
|
|
INPUT SEL. switch
Connection
Connect the DV terminal of the source unit to the DV terminal of this unit with a DV cable.
Setting up this unitSet the INPUT SEL. switch on the front panel to “DV”.
Set the BACKUP REC TIME item of the SYSTEM (1/2) menu.
Use the following settings according to the length of the tape of the source unit.
For DV or mini DV cassettes:
25MIN | : |
55MIN | : |
75MIN | : |
115MIN | : |
175MIN | : |
265MIN | : |
OFF | : No backup recording |
Set the TC DUPLICATE item of the TIME CODE menu to “OFF”.
•It records the data of the
•When the TC DUPLICATE menu item is set to “AUTO” or “NON DROP”, the time code of the DV camcorder will stop advancing. If the DV cable is disconnected, the time code of the backup recording will stop advancing.
Operation
1. Recording begins on the source unit.
*Please record from the beginning of the re- cording tape.
2.This unit begins recording when the tape of the source unit is near the end (about 5 minutes before the end of the tape).
• This unit begins recording when the record- ing time of the source unit reaches the time configured by the BACKUP REC TIME set- ting.
Memo
•Backup recording records the video and sound from the source unit to the main unit.
While this unit is performing backup record- ing, please continue shooting from the source unit.
•The audio mode is the mode configured in the source unit. (32K/48K)
•Please set the BACKUP REC TIME item to “OFF” if the unit is not performing backup re- cording.