JVC BR-DV600AE PLAYBACK – Connection/setting –

PLAYBACK – Connection/setting –

This section explains the required connection, setting and operation method for using this unit as a player.

Connection

Using this unit as a standalone device

Monitor

DV IN/OUT
AUDIO	CH 2/4	LINE	VIDEO	Y/C
CH 1/3
				IN
					REMOTE	DC12V
				OUT		NTSC/PAL
				9PIN		SERIAL NTSC PAL

		Y/C (S) OUT	Y/C (S) video cable
	VIDEO LINE OUT		Video cable
AUDIO OUT			Audio cable

Connecting this unit to a video device with a DV terminal

It can record with almost no loss in image or sound quality.

			DV cable (available separately)
DV
terminal						DV	Monitor
						terminal
DV IN/OUT
AUDIO	LINE	VIDEO	Y/C
CH 1/3 CH 2/4
			IN
				REMOTE	DC12V
			OUT		NTSC/PAL
						Another VTR
			9PIN		SERIAL NTSC PAL

Player: the rear panel of the main unit

Memo

•Turn the power of both devices OFF and connect the DV cable.

•Do not insert incorrectly (in reverse) the DV cable end to DV port of both devices.

•If the recorder is a GY-DV500 or GY-DV700W, and BR-DV3000 is put to PLAY from the STOP mode, the phase of the EE audio output from the camcorder will be displaced. There is no problem with the recorded signals.

•For GY-DV300E, GY-DV500E and GY-DV700W, DV input is not possible.

Connecting this unit to a video device with no DV terminal (analogue signal):

Player: the rear panel of the main unit								Monitor
						Another VTR
DV IN/OUT
AUDIO	CH 2/4 LINE	VIDEO	Y/C
CH 1/3
			IN
				REMOTE	DC12V
			OUT		NTSC/PAL
			9PIN	SERIAL NTSC PAL		Y/C	VIDEO	AUDIO
			Y/C (S) OUT		Y/C (S) video cable	IN	IN	IN
		VIDEO LINE OUT			Video cable
	AUDIO OUT				Audio cable

E-42