MENU SCREEN | – Contents of the menus – (continued) | |||
|
|
| ||
REMOTE menu (continued) | ||||
|
|
|
|
|
Items | Setting |
|
| Contents |
|
|
|
| |
REM STOP SEL | EE |
| Use this menu item to set the action to be performed when a | |
| PB |
| STANDBY ON command is received via the 9 PIN REMOTE ter- | |
|
|
| minal or DV terminal: | |
|
|
| EE: Sets the unit to the EE mode. (The unit will go into the STOP mode.) | |
|
|
| PB: Sets the unit to the PLAY mode. (The unit will go into the STILL mode.) | |
|
|
|
| |
PB START | 0F |
| Use this menu item to adjust the edit timing. When the remote con- | |
DELAY |
| troller is used, there will be a slight delay time before edit starts. To | ||
| 15F |
| rectify the time discrepancy, adjust the timing for starting playback: | |
|
|
| 0F | : No compensation. |
|
|
| 1F to 15F : Delay by the number of frames set by the user. When | |
|
|
|
| this unit is connected to an editing remote controller |
|
|
|
| with no BUMP (synchronization) function, use this set- |
|
|
|
| ting to adjust the editing precision. |
|
|
|
| |
SYNCHRONI- | OFF |
| Use this setting to turn on/off the BUMP function when the unit is | |
ZATION | ON |
| connected to an editing remote controller: | |
|
|
| OFF : No synchronization. | |
|
|
| ON | : Execute synchronization. The editing precision is enhanced . |
|
|
|
| Please set the |
|
|
|
| |
NEXT PAGE |
|
| Display the REMOTE (2/2) menu. | |
|
|
|
| |
PAGE BACK |
|
| Return to the top MENU. | |
|
|
|
|
|
REMOTE (2/2) menu
Items | Setting |
| Contents |
|
|
| |
CONTROLLER | TYPE1- | When remote control is executed via the | |
SEL | TYPE7 | this menu item to set the type of controller connected: | |
|
| TYPE1 : | |
|
| TYPE2 : | |
|
| TYPE3 : | |
|
| TYPE4 : | |
|
| TYPE5 - TYPE7 : (not in use) | |
|
|
| |
FOOT SW | OFF | Set this menu item when an external switch (e.g., a footswitch) is | |
| L EDGE | connected to the SERIAL REMOTE terminal. Before using an ex- | |
| H EDGE | ternal switch (footswitch), please engage the recording pause or | |
| L LEVEL | recording mode: | |
|
| OFF | : Use this setting if the external switch is not used. |
|
| L EDGE | : Recording and recording pause is switched at the |
|
|
| LOW edge of the external switch signal. |
|
| H EDGE | : Recording and recording pause is switched at the |
|
|
| HIGH edge of the external switch signal. |
|
| L LEVEL | : Record at the LOW edge and pause recording at the |
|
|
| HIGH edge of the external switch signal. |
|
|
| |
PAGE BACK |
| Return to the REMOTE (1/2) menu. | |
|
|
|
|