AUDIO/VIDEO menu

Items

Setting

 

 

 

Contents

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO MODE

 48K

Select the audio sampling frequency for recording:

 

 

 

 

32K

48K : Records at 48kHz. It records in the 2-channel stereo mode.

 

 

 

 

 

 

 

 

 

 

 

 

No audio dubbing.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

32K : Records at 32kHz. It records in the 4-channel mode. To per-

 

 

 

 

 

 

 

 

form audio dubbing on CH3 and CH4 later, use this setting.

 

 

 

 

 

 

 

Memo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This setting is not required for DV signal input.

 

 

 

 

 

 

 

 

 

 

 

 

A.OUT AT

OFF

Use this menu item to enable/disable audio output from the AU-

 

 

SEARCH

 ON

DIO OUT terminal during a search:

 

 

 

 

 

 

 

 

OFF

: No output.

 

 

 

 

 

 

ON

: Output.

 

 

 

 

 

 

 

 

 

 

AUDIO OUT SEL

 CH1/CH2

Use this menu item to select the audio channel output from the

 

 

 

 

MIX

AUDIO OUT terminal when playing back tapes recorded in the

 

 

 

 

CH3/CH4

32K mode:

 

 

Memo

 

 

 

CH1/CH2 : Outputs CH1 and CH2 audio.

 

 

 

 

 

MIX

 

: Outputs mixed audio of CH1 and CH3 and mixed au-

 

 

When it

is set to the MIX

 

 

 

 

dio of CH2 and CH4.

 

 

 

 

 

 

 

 

mode,

noise may be pro-

 

CH3/CH4 : Outputs CH3 and CH4 audio.

 

 

duced.

If this occurs,

 

 

Memo

 

 

 

 

 

 

 

 

 

please

set it to CH1/CH2

 

 

 

 

 

 

 

 

 

This setting can also be selected from the AUDIO OUT SEL. but-

 

 

or CH3/CH4.

 

 

 

 

 

 

ton on the wireless remote controller.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO OUT

ATT

Use this menu item to select the standard level for audio playback

 

 

LEVEL

 NORM

output:

 

 

 

 

 

 

ATT

: Attenuates the standard level to –12db. Use this setting

 

 

 

 

 

 

 

 

when playing tapes recorded at the standard level of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–12dB. The playback level is decreased by 8db.

 

 

 

 

 

 

NORM : Sets the standard level to –20dB. Usually, this is selected.

 

 

 

 

 

 

 

Memo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This setting can also be selected with the AUDIO OUT LEV. button

 

 

 

 

 

 

on the wireless remote controller.

 

 

 

 

 

 

 

 

 

 

 

 

SET UP

 OFF

Use this setting to determine whether to apply the setups to the

 

 

(NTSC only)

ON

analogue video signals (composite, Y/C):

 

 

 

 

 

 

(For recording and playback)

 

 

 

 

 

 

 

 

 

 

 

 

OFF

: does not apply the setups.

 

 

 

 

 

 

ON

: applies the setups.

 

 

 

 

 

 

 

Memo

 

 

 

 

 

 

 

 

 

 

 

 

•If dubbing is repeatedly done with the settings of the playback or recording video signals differing from the setting here, the hue and brightness of the video may turn out abnormal.

PAGE BACK

Return to the top MENU.

E-61