OTHERS | – Troubleshooting – | |
|
| |
Symptom | Action | |
|
| |
The power does not come on. | Is the AC adapter correctly connected? | |
|
| |
The cassette cannot be loaded. | Is the cassette indicator lit? If so, a cassette is already loaded. | |
|
| Please unload the cassette first. |
|
| Push the center of the cassette and make sure that the cassette |
|
| enters levelly. |
|
|
|
Unable to record. |
| Is the slide of the cassette set to "REC"? |
|
| Please set it to "REC" if it is at the "SAVE" position. |
|
| |
The operation buttons of the main | Is the OPERATION LOCK item of the SYSTEM (2/2) menu set | |
unit do not work. |
| to “ON”? Please set it to “OFF” so that the operation buttons of |
|
| the main unit can to be used. |
|
| During REMOTE mode, please use the LOCAL function menu |
|
| item to select the buttons to be rendered operable. |
|
| |
The 9 PIN REMOTE or SERIAL RE- | Is the REMOTE item of the REMOTE (1/2) menu set to “OFF”? | |
MOTE cannot be engaged with the | To use the 9 PIN REMOTE or the SERIAL REMOTE, please set | |
REMOTE SEL switch. | it to “ON”. | |
|
| When the OPERATE LOCK item of the SYSTEM(2/2) menu is |
|
| set to “ON”, the REMOTE SEL. switch will not function. |
|
| |
Noise appears on the playback | • Is the tape damaged? | |
screen. |
| Please replace the cassette. |
Playback audio is disrupted. | • Is the head dirty? | |
|
| Please clean it with the dedicated |
|
| (☞ Page 8) |
|
| |
During DV signal input, the time | Is the TC DUPLICATE item of the TIME CODE menu set cor- | |
codes are not recorded correctly. | rectly? | |
|
| |
After holding down the EJECT | Is a cassette loaded? Before attempting to display the menu | |
button of the main unit for 2 sec- | screen with the EJECT button, please remove the cassette. | |
onds or longer, the menu screen |
| |
does not appear. |
|
|
|
| |
Video and sound are distorted for | This occurs if the signal system of the playback tape is different | |
a few seconds after starting play- | from the NTSC/PAL setting. | |
back. |
|
|
|
| |
The wireless remote controller | • Is the REMOTE SEL switch on the main unit set to “WIRE- | |
does not work at all. | LESS”? | |
|
| • Are the batteries exhausted? |
|
| |
Power is not supplied even when | Is the REMOTE SEL switch set at either “SERIAL” or “9 PIN” | |
the OPERATE button is pressed. | when the LOCAL FUNCTION item of the REMOTE menu is set | |
|
| to something other than ALL KEYS? Please set the REMOTE |
|
| SEL. switch to “WIRELESS”. |
|
|
|