English
£/8
or
DISC
or DISC
DISC
7/CLEAR
or
Basics of Using the CD Player — Normal Play
Playing a Disc ———————————————————————
1.Prepare the discs.
2.Press the CD £/8 or DISC button
When using the Remote Control, press the £/8button or the DISC button (1 to 3). The first track of the selected disc will begin playing.
The CD Player automatically stops when the playback finishes the last track of the CD.
•If these buttons are pressed while the tray is open, the tray is automatically closed and playback starts.
To stop play the disc, press the 7STOP button (or the 7/CLEAR button on the Remote Control). To stop play and remove the disc, press the 0button for the disc being played.
To pause, press the CD £/8 button (or the £/8button on the Remote Control). The playing time display will blink.
To cancel pause, press the CD £/8button again (or press the £/8button on the Remote Control). Play continues from the point where it was paused.
or
DISC
DISC
DISC
1 2 3
CLOCK TIMER PTY/EON
4 5 6
– SELECT + DISPLAY MODE
7 8 9
SET
10 
10
Selecting a Disc, Track or Passage Within a Track
1.Press the DISC button
•Example: for the third disc, press 3.
2.Press the 4/1 P. DOWN or ¢/Á P. UP on the MULTI CONTROL to select the track.
When using the Remote Control, press the 4or ¢ button. The selected track starts playing.
Each time you briefly press and release the 4/1P. DOWN or ¢/ÁP. UP, the track changes by one.
•Press and release the ¢/ÁP. UP to go ahead one track at a time.
•Press and release the 4/1P. DOWN to go back one track at a time.
Holding down the 4/1P. DOWN or ¢/ÁP. UP button, during playback, will fast forward/ backwards the CD so you can quickly find a particular passage in the selection you are listening to.
Locating a Track With the Remote Control Directly
Using the number keys on the Remote Control allows you to go directly to the beginning of any track.
1.Press the DISC button
•Example: for the third disc, press 3.
2.Enter the number of the track you want to listen to with the num- ber keys.
The selected track starts playing.
•Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For track 32, press +10 three times, then 2.
Changing Discs While Playing ———————————————
You can replace a CD in a tray not being used, while another CD is playing.
1.Press the 0 button of the tray not being used.
The tray opens.
2.Replace the disc in the tray.
3.Press the 0 button to close the tray.
18
