IMPORTANT
Please read carefully before use.Easy and correct way of copying to a DVD
CU-VD20
1. Get ready a recommended disc
Please use the recommended discs stated below.
Using discs other than those recommended may cause problem when copying to the DVD and when playing back the DVD.
Recommended discs
|
| |||
|
| |||
|
|
|
| |
Brand | JVC | JVC |
| JVC |
| TDK |
|
| Verbatim |
| Verbatim |
|
|
|
| SONY |
|
|
|
|
|
|
|
|
Caution
•Only
•
•Recording and playback may not function properly if the recording side is scratched or dirty.
2. Set up each device before copying
Everio |
Dedicated USB cable
3. Copy all images to the DVD
Perform operations on the Everio.
(Everio LCD screen display)
1Confirm that the display on the right appears on the Everio LCD screen.2 Select “ALL SCENES”
1 Select
(move up and down)
2 Confirm
(press down)
3 Select “ALL”
1 Select
(move up and down)
2 Confirm
(press down)
4Select “EXECUTE”
1 Select
(move up and down)
2 Confirm
1
4
(press down) |
| |
Wait for the “copy in progress” screen on the | “Copy in progress” screen | |
right to disappear, then turn off the power and | ||
|
3 | 2 |
1Connect the USB cable
2Turn on CU-VD20
After turning on the power, wait for approximately 20 seconds before proceeding to step 3 .
The burner may not function properly within this 20 seconds.
3Turn on the Everio
4Insert a new recommended disc into CU-VD20
Next, operate the Everio. Proceed to step 3.
disconnect the USB cable. |
5Exit
Confirm
(press down)
Copying completed!
Note
• There are other ways of copying which includes copying only the desired files. For details, refer to the instruction manual of Everio.