DLA-G150HTE
1-14 No.51847
24
Connecting to Various Devices
Connecting to Video Devices
Before connection, be sure to turn off both the projector and video device.
Read thoroughly the manual that comes with each video device.
Use the supplied video cable. An video cable with an S-video (Y/C) terminal is not supplied.
Notes
Connect a composite image signal output device or Y/C (S-video) image output device.
When connecting the S-video cable, refer to How to attach the ferrite core on page29.
Memo
When connecting a video device, use a TBC along with it, or one which has a built-in TBC.
Use of an extension cable to connect a video device and the projector could cause video degradation.
When a signal with much jitter is reproduced on a VCR, or special-effect playback is performed, the upper part of the image
or the image itself may be erased or distorted.
Y
P
B
/B-Y
P
R
/R-Y
H
V
G
B
R
REMOTE
RS-232C
Y/C VIDEO
• Camcorder
To Y/C
Video cable
(accessory)
To VIDEO
Video devices
• Laser videodisc player
• VCR (Video cassette recorder)
S-video cable
(separately available)
BNC-RCA conversion
plug (accessory) To AV IN
To AV INTo AV IN
To AV IN
23
Connecting to Various Devices
ENGLISHDEUTSHFRANÇAISITALIANOESPAÑOL
Allowable input signals
Notes
The resolution for the input signals is listed in the above table.
Even signals in the frequency range that can be input may not be displayed normally depending on the type of the signal.
When a signal other than listed above is input, the image could be partially erased or an unneeded fold-over image could
appear.
Some signals other than listed above can be displayed. But they may require adjustment.
Even some of the signals listed above may require adjustment depending on the video board used.
Composite sync (C
S
) and G on Sync signals cannot be handled depending on the devices connected.
The VGA signal of the PC system could be displayed in 480p mode of the VIDEO system. (In this case, the projector enters
video menu mode when the MENU button is pressed.)
Signal
Horizontal res-
olution
Hor [Pixels]
Vertical resolu-
tion
Ver [Lines]
Horizontal fre-
quency
H [kHz]
Vertical fre-
quency
V [Hz]
PC system PC98 VESA350 640 350 37.86 84.13
PC/AT PC98 640 400 24.83 56.42
DOS/V VGA 60Hz 640 480 31.47 59.94
VGA 72Hz 640 480 37.86 72.81
VGA 75Hz 640 480 37.50 75.00
VGA 85Hz 640 480 43.27 85.01
SVGA 56Hz 800 600 35.16 56.25
SVGA 60Hz 800 600 37.88 60.32
SVGA 72Hz 800 600 48.08 72.19
SVGA 75Hz 800 600 46.88 75.00
SVGA 85Hz 800 600 53.67 85.06
XGA 43Hz 1024 768/2 35.52 43.48
XGA 60Hz 1024 768 48.36 60.00
XGA 70Hz 1024 768 56.48 70.07
XGA 75Hz 1024 768 60.02 75.03
XGA 85Hz 1024 768 68.68 85.00
SXGA 43Hz 1280 1024/2 46.43 43.44
SXGA 60Hz 1280 1024 63.98 60.02
SXGA 75Hz 1280 1024 79.98 75.03
SXGA 85Hz 1280 1024 91.15 85.02
UXGA 60Hz 1600 1200 75.00 60.00
Mac MAC13 640 480 35.00 66.67
MAC16 832 624 49.73 74.55
MAC19 1024 768 60.24 74.93
MAC21 1152 870 68.68 75.06
Video system Video HDTV (1035i) 60Hz 33.75 60.00
HDTV (1035i) 59Hz 33.72 59.94
480p 720 483 31.47 59.94
720p 60Hz 1280 720 45.00 60.00
720p 59Hz 1280 720 44.96 59.94
1080i 60Hz 1920 1080/2 33.75 60.00
1080i 59Hz 1920 1080/2 33.72 59.94
1080 24sF 1920 1080 27.00 24.00
NTSC 15.734 60
PAL 15.625 50
SECAM 15.625 50