JVC DR-M7S Audio Output, Digital Audio Out, Analog Audio Out, 8 D. RANGE CONTROL, Output Level

Filename [DR-M7EK_11Subsidiary.fm]
DR-M7EK_01.book Page 91 Friday, April 2, 2004 11:21 AM	Masterpage:Right-No-Heading

91

AUDIO OUTPUT

(The boldface settings in the table below indicate the settings at your purchase.)

8 DIGITAL AUDIO OUT	Set to the appropriate mode according to the type of the device connected to
DOLBY DIGITAL/PCM	DIGITAL OUT connector.
STREAM/PCM	DOLBY DIGITAL/PCM:
PCM ONLY	Select this when you connect the digital input connector of a Dolby
	Digital decoder or an amplifier with a built-in Dolby Digital
	decoder.
	STREAM/PCM:
	Select this when you connect the digital input connector of an
	amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel
	decoder.
	PCM ONLY:
	Select this when you connect the linear PCM digital input of other
	audio equipment (amplifier, MD or DAT deck, etc.).
8 ANALOG AUDIO OUT	Select the appropriate setting to accommodate the unit to the connected A/V
STEREO	equipment. This function takes effect when a DVD VIDEO disc is played back.
DOLBY SURROUND	STEREO:
	Select this when listening to conventional two-channel stereo audio
	with the unit’s AUDIO OUT connectors connected to a stereo
	amplifier/receiver or TV set, or in case you want to record the audio
	from a DVD VIDEO disc to a Mini Disc, etc.
	DOLBY SURROUND:
	Select this when listening to multichannel surround audio with the
	unit’s AUDIO OUT connectors connected to an amplifier/receiver
	with a built-in surround decoder or a surround decoder.
8 D. RANGE CONTROL	The dynamic range (the difference between the loudest sound and the quietest
NORMAL	one) can be compressed during playback of a programme encoded in Dolby
WIDE RANGE	Digital format.
TV MODE	This function takes effect when a DVD VIDEO disc recorded in Dolby Digital
	format is played back at low or middle volume.
	NORMAL:
	Normally select this setting to activate this function.
	WIDE RANGE:
	Select this to deactivate this function when you enjoy wide dynamic
	range programme.
	TV MODE:
	Select this when you hear the sound through the TV’s speaker(s).
	NOTES:
	● This function takes no effect on programmes other than that recorded in Dolby Digital
	format.
	● This function dose not work when Simulated Surround Effect is activated. ( pg. 46)
	● The effect of “NORMAL” and “WIDE RANGE” may not be different depending on discs.
8 OUTPUT LEVEL	You can lower the output level of analog audio to accommodate the unit to the
STANDARD	connected A/V equipment.
LOW	STANDARD:
	Normally select this setting.
	LOW:
	The output level of analog audio is lowered.

Page 91

April 2, 2004 11:21 am