14

Using the CD Player

English

To Unload a CD

Take out the CD as shown below.

Basics of Using the

CD Player-Normal Play

To Play a CD

The display explained here is for digital audio CDs. It
differs a little depending on the disc to be used. For
example, when a video CD is played, “VCD” will be dis-
played instead of “CD”.
1Insert a CD.
2Press the CD #¥8 button.
The first track of the CD begins playing.
The track number that has already played disappears
from the music calendar.
The CD Player automatically stops when the last
track of the CD has finished playing.
To stop playing the CD, press the 7 button.
The following information for the CD is displayed.
To stop playing and remove the CD, press the
OPEN/CLOSE button on the Unit to open the Top Cover.
To pause, press the CD #¥8 button. The playback time
blinks on the display.
To cancel pause, press the same button again. Play con-
tinues from the point where it was paused.

To Select a Track or Passage within a Track

During playback, press the 4 or ¢ (DOWN or UP, or
< or >) button on the Unit or the Remote Control to select
the track you want.
The selected track starts playing.
Press the ¢ (UP or >) button on the Unit or the
Remote Control once to skip to the beginning of the
next track.
Press the 4 (DOWN or <) button on the Unit or the
Remote Control to skip to the beginning of the track
being played. Press twice quickly to skip to the begin-
ning of the previous track.
When the > or < button on the Remote Control is
kept pressing, the track continuously skips.

Search Play

Holding down the 4 or ¢ (DOWN or UP) button on
the Unit or the Remote Control, during playback, will fast
forward/backwards the CD so you can quickly find a partic-
ular passage in the track you are listening to.

Programming the

Playing Order of the Tracks

You can program the playing order of the tracks using the
Remote Control.
You can program up to 32 tracks in any desired order in-
cluding the same tracks.
You can only make a program when the CD Player is
stopped.
1Insert a CD.
2Press the CD #/8 button.
3Press the 7 button to stop the CD.
4Press the PLAY MODE button until the
"PROGRAM" indicator lights up on the
display.
Each time you press the PLAY MODE button, the dis-
play changes as follows:
CD - - P - - (Program Play) --> CD RANDOM (Ran-
dom Play) --> Normal Play --> (back to the beginning)
5Press the UP, DOWN, >, or < button to
select the track to program.
UP or > button: Increases the track number by 1.
DOWN or < button:Decreases the track number by 1.
When the > or < button is kept pressing, the track
number changes rapidly.
NTSC / PAL COMPATIBILITY
Track number Playback time
Total track number Total playback time PLAY MODE
PROGRAM
(To be continued on the next page)
FS-SD58V_A2.fm Page 14 Thursday, September 28, 2000 4:50 PM