7
ENGLISH
Controls and Features (cont.)
Left-hand side
p
q
w
e
r
pAC IN (power input) terminal
This is the power input terminal where the supplied power
cord is connected. For details, refer to page 24.
qMAIN POWER switch
This is the main power switch. When it is turned on, the
projector goes into stand-by state, and the STAND BY
indicator on the control panel comes on.
ON [ ❙ ]: The main power turns on.
OFF [‡‡
‡‡
‡]: The main power turns off.
wConnector panel
For details, refer to “Connector Panel” on page 11.
eAdjustable foot (for horizontal angle adjustment)
It is set at the shortest position when shipped from the
factory. Turn the foot to make the projector level. Adjustment
can be made in the range of + 1.5° and – 1.5° from the
horizontal position.
Extend Shorten
+1.5°
–1.5°
rLENS SHIFT knob / SHIFT LOCK fixing bolt
The projection screen can be shifted up and down in
position. Use this adjustment when you use a different
installation configuration (such as dual stacking) which
requires the lens to be shifted. The amount of lens shift
can range from approx. 30% to 55%. For more information,
refer to “Setting the Amount of Lens Shifting” on page 17.
G1500M p.05-14 99.8.25, 1:03 PM7