JVC 0706TKH-CR-MU, GGT0128-001A-H-EN Troubleshooting, snow, Ghosting, Severe noise or, I can’t turn it on, Patterns, stripes or noise, The remote control doesn’t work, Basics, Screen, Picture

When you have trouble

Troubleshooting

ENGLISH	snow
	Severe noise or

Is the TV connected correctly to the aerial?

Change the direction of the aerial.

Is the aerial or its cable damaged?

Consult your retailer

Patterns, stripes or noiseI can’t turn it on!

Is the power cord connected to the AC outlet correctly?

Is the aerial receiving interference from high-voltage power lines or wireless transmitters?

Consult your retailer

Are connected devices too close to the TV?

Insert the minimum distance between the aerial and the cause of interference until no interference

ProblemRemote control stops workingBasicsFront control buttons does not workAspect ratio changes unintentionallyScreenPC screen alignment is offPoor picture quality

Actions

Unplug TV, several minutes later plug it in again.

Switch “Child Lock” to “Off”.

Press “ ” to return to your settings.

Adjust the “PC position”.

Unnatural colour >>> Adjust “Colour” and “Back Light”. Check your “Colour System”. If “Auto” is selected, select the speciﬁc colour system manually.

Noise >>> Set to the following functions.

Picture Mode : Standard

Super DigiPure : Max

Dull picture >>> Set to the following functions.

Picture Mode : Bright

Super DigiPure : Min

page

–

ENGLISH

	28	IMPORTANT!
	28
	17
	21	PREPARE
	21
	28
	30
	28	USE
	30	USE
	30

Ghosting

(Doubling of images)

Are you receiving interference from signals reﬂected off mountains or buildings?

Adjust the direction of your aerial, or change to a good-quality directional aerial

The remote control doesn’t work!

Are the batteries ﬂat?

Are you more than 7 meters away from the TV?

Is the “MODE (VCR / TV / DVD)” set to “TV”?

When viewing teletext, the TV menu bar does not appear.

Depending on the stability of the signal, there may be a time lag when changing channels.

Picture	Strange picture
	Strange picture
	when using an external
	device

Blue screen appears on the screen

If the top of the image is distorted, check the video signal quality itself.

If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace- scanning).

Switch “Blue Back” to “Off”.

	–	SETTINGS
	–	SETTINGS
	–

26	TROUBLE?