BASIC FEATURES

5Sec. Rec (5-sec. Recording)

To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs.

1)Make sure the recording mode is set to “SP”.

2)During Record–Standby, press 5SEC. REC 2.

5S a appears and 5Sec. Rec is reserved.

3)Press the Recording Start/Stop Button 9. Recording starts, and after 5-second recording is finished, the camcorder re-enters the Record– Standby mode automatically.

4)To cancel the 5Sec. Rec. function, press 5SEC.

REC 2 again so that 5S a disappears.

Fade/Wipe ( pg. 23) cannot be activated by pressing 5SEC. REC 2.

Backlight Compensation

To quickly increase the brightness of the subject relative to the background.

1)Press BACK LIGHT w during recording. “ ” is displayed and the subject is brightened.

2)To cancel Backlight Compensation, press BACK LIGHT w again. “ ” disappears and the brightness returns to the previous level.

Backlight Compensation functions in both recording modes (“ ” or “”).

Using BACK LIGHT w may make the subject too bright, resulting in a washed out or white image.

BACK LIGHT w cannot be used when the manual Exposure Control mode ( pg. 18) is engaged.

Auto/Manual Focus

If correct focus cannot be obtained with Auto Focus, use Manual Focus.

1)Set the Power Switch ! to “” while pressing

down the Lock Button 0 located on the switch.

2) Press FOCUS 4. “ ” appears.

3)To focus on a distant subject, rotate the MENU Wheel 1 upward. “A” appears and blinks.

To focus on a close subject, rotate the MENU Wheel 1 downward. “ B” appears and blinks.

4)To cancel the Manual Focus, press FOCUS

4. “ ” disappears and the Auto Focus is applied.

When the focus level cannot be adjusted any farther or closer, “ ” or “ ” will blink.

12