Connection To A Personal Computer

It is possible to transfer video to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 Turn the camcorder’s Power Switch r to “PLAY” while pressing down the Lock Button e located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer video to the PC.

4 When finished, turn off the PC first, then the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 7).

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depend- ing on the type of DV connector (4 or 6 pins) on the PC.

●The system may not work properly depending on the PC or capture board you are using.

●When using the DV connection refer to manufacturer instructions of your capture board for driver’s installation and operation instructions.

r

OFF (CHARGE)

PLAY

To DV 0

Core filter

DV cable (optional)

Core filter

To DV connector

PC with DV connector

EN

28 SYSTEM CONNECTIONS