VIDEO PLAYBACK
24 EN
MasterPage: Left
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(墌pg. 25)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1Pull out the battery
holder by pushing the lock
tab.
2Insert the battery in the
holder, and be sure to
have the “+” mark visible.
3Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
AInfrared beam transmitting window
●Transmits the beam signal.
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
BPAUSE Button
●Pauses the tape (墌pg.25)
Up Button (墌pg.26 )
CSLOW Rewind Button (墌pg.25)
DREW Button
●Rewind/Reverse Shuttle Search on a tape
(墌pg.22)
Left Button (墌pg. 26)
EINSERT Button (墌pg.44)
FSHIFT Button (墌pg. 26)
GDISPLAY Button (墌pg.23, 40)
HSLOW Forward Button (墌pg. 25)
IPLAY Button
●Starts Playback of a tape (墌pg.22)
JFF Button
●Forward/Forward Shuttle Search on a tape
(墌pg.22)
Right Button (墌pg.26)
KA. DUB Button (墌pg.43)
LSTOP Button
●Stops the tape (墌pg.22)
Down Button (墌pg. 26)
MEFFECT Button (墌pg. 26)
NEFFECT ON/OFF Button (墌pg. 26)
Playback Using The Remote
Control
1
1
2
3
3
Lock tab
Remote sensor
GR-DF428AH.book Page 24 Friday, March 18, 2005 5:07 PM