Operating other equipment
Operating other equipment
You can operate your TV, digital broadcast satellite (DBS) and video cassette recorder (VCR) using the remote control of this system.
Number buttons*/
TV RETURN/ 100+
Remote control mode selector
3 (playback)
*For the number button usage, refer to “Using the number buttons” on page 12.
Operating a TV using the remote control
Setting the manufacturer code
■IMPORTANT
• Slide the remote control mode selector to the lowest position.
1 Press [TV].
2 Hold down [TV F].
• Hold down [TV F] until you finish step 5.
3 Press [ENTER].
4 Press number buttons to enter the manufacturer code.
Examples:
For a Hitachi TV: Press [1], then [0].
For a Toshiba TV: Press [0], then [8].
When the manufacturer of your TV has 2 or more codes, enter the manufacturer codes in turn and find the one that operates the TV and the remote control properly.
Manufacturer | Code |
JVC | 01 |
Hitachi | 10 |
Magnavox | 02 |
Mitsubishi | 03 |
Panasonic | 04, 11 |
Philips | 15 |
RCA | 05 |
Samsung | 12, 18, 19, 20, 21 |
Sanyo | 13, 14 |
Sharp | 06, 16, 17 |
Sony | 07 |
Toshiba | 08 |
Zenith | 09 |
The initial code setting is “01 (JVC)”.
5 Release [TV F].
NOTE
•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].
•Manufacturer codes are subject to change without notice. You may not be able to operate the TV produced by the manufacturer.
•After replacing the batteries of the remote control, set the manufacturer code again.
53