Other Features

Operation Sound and Tally

 

Restoring the Default

Settings

 

Settings

 

 

 

You can select whether to enable the operation sound as well as illumination of the tally lamp.

Operation sound

Set using [OPERATION SOUND] in the [CAMERA SETTINGS] menu. (A Page 66)

When this is set to [ON], operation sound is output from the built-in speaker.

If a headphone is connected, no operation sound will be output from both the built-in speaker and headphone.

Tally lamp

Set using [TALLY] in the [CAMERA SETTINGS] menu. (A Page 66)

When this is set to [ON], the tally lamp lights up in the recording mode.

Displaying the Hour Meter

The hour meter displays the total time during which the power of the camcorder is turned on.

1. Select [HOUR METER] in the [DISPLAY SETTINGS] menu. (A Page 65)

2. Press the center of the Set Lever.

●The hour meter appears.

3. Press the center of the Set Lever again.

●Returns to the menu screen.

You can reset the menu settings to their default values. However, the time code/user’s bit, date/time, and hour meter cannot be reset.

1. Select [RESET ALL MENU] in the [CAMERA SETTINGS] menu.

2. Press the center of the Set Lever.

●The [RESET ALL MENU] screen appears.

RETURN SETTINGS TO

DEFAULT SETTINGS?

EXECUTE

CANCEL

SELECT SET MENUQUIT

3. Restore the default settings.

Push the Set Lever up or down to select [EXECUTE]. Next, press the center of the Set Lever.

●The menu screen closes, and the settings are reset to their default values.

The camcorder reboots automatically if there are changes in the [SYSTEM SELECT] menu.

56