If the SD card is removed while data is being accessed, the request for recovery screen may appear repeatedly even if execution is selected. When this happens, format the SD card. All data will be deleted.
Do not use or store this device in a place that is subject to static electricity or electrical noise.
Inserting the SD card incorrectly may result in damage of this device or the SD card.
We are not liable for any accidental loss of data stored on the SD card. (Please back up any important data.)
Make use of the SD card within the prescribed conditions of use.
Do not use the SD card in places that are subject to direct sunlight, high humidity or corrosion, places near thermal equipment, or in a car under the sun with the doors and windows closed.
Do not bend or drop the SD card, or subject it to strong impact or vibration.
Do not splash the SD card with water.
Do not place the SD card near locations that are exposed to strong magnetic fields or radio waves.
Do not touch the metal parts.
If you want to wipe out all information by completely erasing the data, we recommend either using commercially available software that is specially designed for that purpose, or by physically destroying the SD card with a hammer, etc. When formatting or erasing data using the camera, only the file administration information is changed. The data is not completely erased from the SD card.
Rechargeable Battery
Be sure to use only JVC batteries.
We do not guarantee the safety and performance of this device if a battery other than a JVC product is used.
The battery is not charged when purchased.
When using the battery in a low temperature environment (10°C or below), the operating time may be shortened, or it may not function properly. When using the device outdoors in the winter weather, warm the battery, such as by placing it in the pocket, before attaching it.
Do not expose the battery to excessive heat, such as direct sunlight or fire.
If the battery is not to be used for a long time,
A use up the charge completely and detach it from the camera to prevent deterioration. (Wait for the battery to run out by itself such as through continuous shooting or playback.)
B charge the battery once every half a year, and store it again after using up the charge.
Attach the battery cap after removing the battery, and store it in a dry place between 15°C to 25°C.
Battery
Battery Cap
ATTENTION:
The product you have purchased is powered by a rechargeable battery that is recyclable. Please call
Characteristic CCD Phenomena
Smear and blooming
When shooting an extremely bright light source, vertical streaking (called "smear") may occur or expansion of light (called "blooming") may appear around it. This is a characteristic of the CCD and not a malfunction.
Smear
Vertical pale streaking appearing at
high luminous object
High luminous object
(Electric light, sunlight, etc.) Blooming
Blurring in highlight
Moire or aliasing
Stripes, lines or other fine patterns may appear jagged when they are shot.
White dots
High temperatures can cause CCD sensor pixels to produce white dots in the image. This condition is conspicuous especially when gain is applied.
This is a characteristic of the
Characteristic Lens Phenomena
When shooting an extremely bright light source, ghosting may occur. This is a characteristic of the lens and not a malfunction.
Copyright
Any recordings made on this camcorder that are played back for profit or public preview may infringe on the rights of the owner of the recordings.
Do not use the recordings for purpose other than personal enjoyment without prior consent from the owner.
9