Registering Files to Events

If you select an event to register the file to before starting recording, you can find the file easily at playback.

Preparation:

•Select ! mode.

•Select the recording mode.

1 Touch MENU.

2 Select [REGISTER EVENT].

3 Select the event.

The selected event is displayed on the screen.

To quit the screen Select [QUIT].

To search by event See page 28.

NOTE

Once you select a certain event to register a file, the setting will remain even if you turn off the camcorder.

Turning on the Face Detection Mode

If you set this mode on, the camcorder detects the faces and adjust brightness and focus so that the faces are recorded clearly.

Preparation:

•Select ! or # mode.

•Select the recording mode.

Select .

To turn off the face detection mode Select again.

Recording still images with the face detection mode turned on

1)Press and hold SNAPSHOT half way.

2)Press SNAPSHOT.

Using the self-timer in the face detection mode

Preparation:

Set [SELF-TIMER] to [FACE DETECTION].

1)Press SNAPSHOT. Faces are detected.

2)The still image is recorded 3 seconds after the face of the photographer is detected.

Photographer

NOTE

•If the LCD monitor is turned upside down,

is not displayed. Change the setting when the LCD monitor is in the normal position.

•You cannot turn on the face detection mode if [SELF-TIMER] is set to [FACE DETECTION]. (This is indicated by blinking .)

•Depending on the condition, faces may not be detected.

•If the face detection does not work correctly, turn off the mode before recording.

EN 23