Changing the Menu Settings (Continued)

Menus

 

 

Settings: [ ] = Factory-preset

 

 

 

 

RECORD BUTTON

 

OFF:  Deactivates the function.

Enables the recording button [REC]

 

 

[ON]:  Activates the function.

on the LCD monitor.

 

 

 

 

` QUICK RESTART

 

OFF:  Deactivates the function.

 

[ON]:  If the LCD monitor is opened again within 5 minutes,

Enables the camcorder to start

 

the camcorder starts quickly. The power consumption

up quickly when you turn off the

 

used for the 5 minute period after the LCD monitor is

camcorder and then on again within

 

 

closed is approximately 1/3 that used during recording.

5 minutes by closing and opening

 

 

This enables you to save more power than leaving the

the LCD monitor.

 

 

 

power on.

 

 

OFF:  Deactivates the function.

 

 

[ON]:  Activates the function.

^ DROP DETECTION

 

To turn on the camcorder when the drop detection

 

worked, close the LCD monitor and open it again.

Prevents damage to the HDD by

 

 

 

turning off the power automatically

 

NOTE

 

when it is detected that the

 

• The built-in hard disk of the camcorder may not be protected

camcorder dropped.

 

even if the setting is [ON].

 

 

• When recording/playback stops even if the camcorder is not

 

 

dropped, set the setting to [OFF] or set [REC MEDIA FOR

 

 

VIDEO] to [SD]. (Z p. 68)

] REMOTE

 

OFF:  Does not receive the signal from the remote control.

Turns on/off reception of the

 

operation signal from the remote

 

[ON]:  Enables operation with the remote control.

control.

 

 

 

 

 

OFF:  Makes created DVDs recordable (not playable on

 

 

device other than the camcorder).

 

 

[ON]:  Finalizes created DVDs so that they can be played

 

 

back on DVD burner.

_ AUTO FINALIZE

 

 

 

NOTE

you play back a DVD created when [OFF] is set on

Sets the DVD to a readable state.

 

• When

 

 

DVD burner, select [FINALIZE] on the DVD creation screen.

 

 

(Z p. 49)

 

 

• When you create two or more DVDs at the same time, other

 

 

than the last DVD is finalized automatically even if the setting

 

 

is [OFF].

 

 

YES:  Performs this function.

UPDATE

 

[NO]:  Cancels this function.

 

 

 

Updates and improves the system

 

NOTE

 

software.

 

Information about obtaining system update will be made

 

 

 

 

available on the JVC’s web site.

Z FACTORY PRESET

 

YES:  Performs this function.

Returns all the camcorder settings to

 

[NO]:  Returns to the menu screen without executing reset.

their default values.

 

 

 

66EN