Troubleshooting
The camera is a
The following phenomena are not malfunctions.
•The camera heats up when it is used for a long time.
•The battery heats up during charging.
•When playing back a video, the image stops momentarily or the sound is interrupted at junctions between scenes.
•To solve the problem, fi rst follow the instructions below.
•If the problem is not solved, reset the camera.
•If the problem persists, please consult your nearest JVC dealer.
Power Card
Recording
Trouble | Action |
•Check that the microSD card is facing the right direction.
Cannot insert the microSD card.
No power is supplied. | • Connect the AC adapter correctly. |
| • Recharge the battery. |
After the low | • When the camera has warmed up after being cold, the camera |
temperature message | may switch itself off to check it is operating correctly. |
is displayed, the power |
|
turns off when the |
|
camera warms up. |
|
Recording cannot be | • Open the LCD monitor to turn on the camera. |
performed. | • Press PLAY/REC to select the recording mode. |
| • If the camera temperature increases, REC fl ashes in the LCD |
| monitor. If the temperature continues to increase, operation stops |
| automatically to protect the HDD. |
Recording stops by | • Move to a place where the camera is not affected by excessive |
sound or vibration. | |
itself. | • Insert a commercially available microSD card, and set each of |
| the [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to |
| [SD]. |
| • Recording stops automatically after 12 hours of continuous |
| recording. |
| • Clean any dirt or water droplets from the lens. |
The focus is not | • Set focus to the automatic mode. |
adjusted automatically. | • If you are recording in a dark place or a subject that has no |
| contrast between dark and light, adjust the focus manually. |
|
|
| • Check the indication that represents that function. |
A function cannot be | • If the indication is fl ashing or off, you have selected two functions |
activated. | that cannot be used together. Choose which of the functions to |
| use. |
EN 37