Necessary Settings before Use

Power/Mode

Switch

Access/Charge

Lamp

Set Lever

Be sure to confi gure the following 3 settings before use.

Charging the Battery Pack

1 Set the power/mode switch to OFF.

Slide while pressing down the lock button.

OFF (CHARGE)

2 Attach the battery pack.

Slide the battery pack down until it locks in place.

BATT.

3 Connect the AC adapter.

DC Connector

AC Adapter

To AC Outlet (110V to 240V)

•The access/charge lamp blinks to indicate charging has started.

•When the lamp goes out, charging is

fi nished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera.

Required charging / recording time (approx.)

Battery pack

Charging time

Recording

time

 

 

BN-VF815U

2 hr. 40 min.

1 hr. 25 min.*

(Provided)

1 hr. 25 min.**

 

 

 

BN-VF823U

3 hr. 50 min.

2 hr. 10 min.*

2 hr. 5 min.**

 

 

 

 

 

*Using the LCD monitor

**Using the LCD monitor and the LED light

8 To detach the battery pack

Slide and hold BATT. ( step 2), then remove the battery pack.

8 To check the remaining battery power See page 18.

NOTES

•You can also use the camera with just the AC adapter.

•Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.

16