8 When you have finished operation

Always follow the procedures below when disconnecting the camera, or turning off the camera/computer power.

Failing to do so may cause damage to the camera and computer.

1)Drag & drop the recording medium icon on the desktop into the [Trash] icon.

If the confi rmation message appears, click [OK].

2)Confi rm that the access/charge lamp on the camera does not light or blink.

If the access/charge lamp lights or blinks, wait until it is turned off before proceeding.

3)Disconnect the USB cable.

4)Turn off the camera and computer.

File Backup on the Macintosh

Preparation:

Connect the camera to the computer with the USB cable. ( pg. 64)

1 On the computer, create a folder to back up files into.

2 Set the camera’s power/mode switch to ON.

3 On the camera, move the set lever to

¡/ ¢ to select [PLAYBACK ON PC], then press down.

4 Double-click [EVERIO_HDD] or [EVERIO_SD].

5 Select the folder that you want to back up, and drag & drop it into the folder you created in step 1.

•SD_VIDEO:

Folder that contains video fi les. If you want to back up fi les individually, open this folder, and drag & drop fi les such as [PRG001] one by one.

•DCIM:

Folder that contains still image fi les. If you want to back up fi les individually, open this folder, and drag & drop fi les such as [PIC_0001.JPG] one by one.

ENGLISH

PLAYBACK ON PC

BACK UP

 

 

SELECT

 

SET

QUIT

 

 

NOTE

For further details on the use of folders, see page 72.

65