Necessary Settings before Use
Charging the Battery Pack
1 Close the LCD monitor to turn off the camera.
2 Attach the �������battery �����pack.
BATT.
3 Connect the AC adapter.
DC Connector
| To AC Outlet |
AC Adapter | (110V to 240V) |
|
•The power/charge lamp blinks to indicate charging has started.
•When the lamp goes out, charging is finished.
Required charging/recording time (approx.)
*When the LED light is off and the monitor backlight is set to [STANDARD] mode.
Battery pack | Charging time | Recording | |
time | |||
|
| ||
2 hr. 40 min. | 1 hr. 25 min.* | ||
(Provided) | |||
|
| ||
|
|
| |
3 hr. 50 min. | 2 hr. 10 min.* | ||
|
|
|
NOTE
The actual recording time may shorten depending on the recording environment, such as when recording scenes with fast moving.
To detach the battery pack
Slide and hold BATT. (step 2), then remove the battery pack.
To check the remaining battery power See page 24.
NOTES
•You can also use the camera with just the AC adapter.
•Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.
18EN