Troubleshooting (Continued)

The following phenomena are not malfunctions.

•LCD monitor momentarily becomes red or black when sunlight is recorded.

•Black spots, or red, green, or blue spots appear on the LCD monitor.

(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be ineffective.)

Maintaining HDD Performance Periodically perform [CLEAN-UP HDD].

If a malfunction occurs in the HDD

! Perform [CLEAN-UP HDD].

# If this does not solve the malfunction, perform [FORMAT HDD]. (All data is deleted.)

$ If this does not solve the problem, perform the disc check function from a PC after formatting. % If this does not solve the problem, contact the JVC customer service for repairs.

To reset the camera

! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the

camera, then reattach it.

# Execute [FACTORY PRESET] in the [BASIC SETTINGS]. (Z p. 57)

Cleaning

Before cleaning, turn off the camera and remove the battery pack and AC adapter.

To clean the camera

Wipe the camera gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with a dry cloth.

To clean the LCD monitor

Wipe the monitor gently with a soft cloth. Be careful not to damage the monitor.

To clean the lens

Wipe gently with lens cleaning paper.

NOTES

•Avoid using strong cleaning agents such as benzine or alcohol.

•Mold may form if the lens is left dirty.

•When using a cleaner or chemically treated cloth, refer to the cautions for each product.

62EN