Troubleshooting (Continued)
Displays
Playback
Dubbing
problems Other
Trouble | Action | |
| • Operate the camera. | |
| ||
The LCD monitor | (When using the AC adapter, if the camera is not operated for a | |
appears blank. | certain length of time it will enter sleep mode, the video/still image | |
| mode lamp lights, and the LCD backlight turns off.) | |
The same scene | • Replace the microSD card. | |
(If there are scratches etc. on the microSD card, the camera will | ||
appears stopped for a | ||
have diffi culty reading the data, and this phenomenon may occur. | ||
long time. | The camera will try to play back as much as possible, but if this | |
| condition continues, the camera will not be able to play back the | |
| ||
| video and it will automatically stop.) | |
Video movement | • Perform cleanup or formatting. | |
appears jerky. |
| |
|
| |
Images look unnatural | • Change [VIDEO OUTPUT] in the output setting menu to match | |
your TV. | ||
on the TV (long and | ||
| ||
thin etc.) |
| |
|
| |
| • When recording the white balance was not correctly adjusted. | |
The color of images | • When the video was recorded with x.v.ColorTM set to [ON], change | |
looks strange. | the setting as desired on TV. | |
• Check all of the following. | ||
- Record with [QUALITY] in the video menu set to [1440 CBR]. | ||
dubbing cannot be | - Create a playlist, then dub the playlist. (Dubbing cannot be done | |
performed to a HDV | for each video fi le.) | |
device. | - When dubbing, set [i.LINK OUTPUT (DUB)] in the output setting | |
| menu to [1440 CBR]. | |
When dubbing, the | • Operate the video device manually to start and stop recording. | |
connected video |
| |
device does not |
| |
start recording |
| |
automatically. |
| |
The camera operates | • Copy all fi les from the media onto your computer, and erase the | |
slowly when | fi les from the media. | |
switching between | (If there are many still images (more than 1,000 fi les) on the | |
video mode and still | media, it takes time for the camera to process the fi les.) | |
image mode, or when |
| |
switching the power |
| |
on or off. |
| |
| • Check the remaining battery charge. | |
The lamp does not | (When the battery is fully charged, the lamp does not fl ash.) | |
• When recharging in either a hot or cold environment, ensure that | ||
flash during battery | ||
battery is being charged within the permitted temperature range. | ||
charging. | ||
(If the battery is being recharged outside the permitted | ||
| ||
| temperature range, recharging may stop to protect the battery.) | |
|
|
38