Still Image Recording
Preparation: Set the power/mode switch to STANDBY/ON.
ENGLISH
Slide the power/mode switch to MODE to select # (still image) mode.
MODE The switch returns to the original position when it is released.
The # lamp on the camera lights up.
Press the PLAY/REC button to select recording mode.
19
SELECT
PLAY/REC
8 To change the picture quality Change the settings in [QUALITY]. ( pg. 69)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to [ON]. ( pg. 69)
8 To change the image size Change the settings in [IMAGE SIZE]. ( pg. 69)
NOTES
Press and hold the SNAPSHOT button halfway.
1920 FINE [
The ? indicator becomes green when the captured image is focused.
Press the SNAPSHOT button to start recording.
20 FINE [ 9 9 9 9 ]
PHOTO
•If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. To turn the camera on again when using the battery pack, set the power/mode switch to OFF, then to STANDBY/ON. When using the AC adapter, perform any operation such as zooming.
•The sides of still images recorded in 16:9 size may be cut off when printed. Check whether 16:9 size prints can be printed at your local print store.
21