Managing Files (Continued)
To Extract a Still Image File From a
Video File – ! mode only
You can extract the desired scene from a recorded video file, and record it as a still image file.
Preparation:
•Slide the power/mode switch to MODE to select ! mode.
•Press the PLAY/REC button to select playback mode.
1 Select the desired video file.
Select | VIDEO | 8/8 |
Set | SELECT SET | SORT |
DPOF Print Setting – # mode only
The number of prints to make of a still image recorded on an SD card can be set. This feature is useful when taking the SD card to a photo lab for printing.
Preparation:
•Slide the power/mode switch to MODE to select # mode.
•Press the PLAY/REC button to select playback mode.
•Set [REC MEDIA FOR IMAGE] to [SD]. ( pg. 69)
1
FUNCTION
DELETE
PROTECT
COPY
MOVE
EFFECT
DPOF
Playback starts. Search the desired scene.
2
SNAP
SHOT
NOTES
•Extracted still images are stored at a resolution of 1920 x 1080. The image can be elongated in the horizontal or vertical directions depending on the picture quality of the source video file.
•Images cannot be extracted when the video file is in search or
•The continuous shooting function ( pg. 69) cannot be used to extract images.
2 Select [DPOF].
Select
DPOF
SELECT IMAGES
ALL 1
CHECK SETTINGS
RESET
Set |
|
|
SELECT SET | QUIT |
Setting Files Individually
After performing steps
3 Select [SELECT IMAGES].
Select | DPOF TOTAL: 0 | 8/8 |
Set | SELECT SET | QUIT |
42