STARTED | Other Settings |
the | |
| Using an SD Card |
GETTING | The camcorder is programmed to record on |
• SD cards. | |
| factory. You can change the recording medium |
| to an SD card. |
| Operations are confirmed on the following |
| - Panasonic |
| - TOSHIBA |
| - SanDisk |
| - ATP |
| Video recording: |
| Class 4 or higher compatible SDHC card |
| (4 GB to 32 GB) |
| Still image recording: |
| SD card (256 MB to 2 GB) or SDHC card |
| (4 GB to 32 GB) |
| • Operations are not guaranteed if any other |
| SD card than the mentioned above is used. |
| • If other media are used, they may fail to |
| record data correctly, or they may lose data |
| that had already been recorded. |
| • MultiMediaCards are not supported. |
| • Video data may not be recorded onto the |
| SD cards on which video data have already |
| been recorded using the devices from other |
| manufacturers. |
| • It is recommended to use Class 6 when |
| recording video in UXP mode. |
| NOTE |
| No SD card is supplied with your camcorder. |
| Insert an SD card |
| Preparation: |
| Press the < (Power) button for more than |
| 2 seconds to turn off the camcorder. |
| 1 Slide the OPEN knob to open the SD |
| card cover. |
| 2 Firmly insert the card with its clipped |
| edge first. |
| OPEN Knob |
3 Close the SD card cover.
To remove an SD card Push the SD card once.
After the card comes out a little, pull it out.
NOTE
•Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted.
•Do not touch the terminal on the reverse side of the label.
Change the recording medium
Set [MEDIA SETTINGS] & [REC MEDIA
FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD CARD].
Format an SD card when using it for the first time
Select [MEDIA SETTINGS] & [FORMAT
SD CARD] to format the card.
18EN