FURTHER INFORMATION
Changing the Menu Settings
1
2
Touch MENU.
Select the desired menu.
To return to the previous screen Select @.
To quit the screen Select [QUIT].
3 Select the desired setting.
Troubleshooting
FURTHER INFORMATION
Before requesting service, consult the following chart. If the solutions indicated in the chart do not solve the problem, consult your nearest JVC dealer or JVC service center for instructions.
Refer also to the FAQ of new products on JVC’s website.
The following phenomena are not malfunctions.
•The camcorder heats up when it is used for a long time.
•The battery heats up during charging.
•When playing back a video, the image stops momentarily or the sound is interrupted at junctions between scenes.
•LCD monitor momentarily become red or black when sunlight is recorded.
•Black spots, or red, green, or blue spots appear on the LCD monitor.
(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be ineffective.)
Power
Display
Trouble | Action | |
| • Connect the AC adapter correctly. | |
| ||
No power is supplied. | • Recharge the battery pack. | |
|
| |
The power/charge lamp | • [QUICK RESTART] is set to [ON]. | |
blinks when the LCD | • The battery is being charged. | |
monitor is closed. |
| |
| • Fully charge the battery pack, run it down, and then recharge it | |
The remaining battery | again. | |
• If the camcorder is used for long periods of time in high or low | ||
display is not correct. | ||
temperatures, or if the battery pack is repeatedly charged, the | ||
| ||
| amount of remaining battery may not be displayed correctly. | |
The LCD monitor is | • The LCD monitor may be difficult to see if used in bright areas | |
difficult to see. | such as under direct sunlight. |
36EN