Necessary Settings before Use
Be sure to confi gure the following three settings before use.
Charging the Battery Pack
1 Close the LCD monitor to turn off the camera.
2 Attach the battery pack.
Slide the battery pack down until it locks in place.
Bottom of the Camera
BATT.
3 Connect the AC adapter.
DC Jack
AC Adapter
To AC Outlet (110V to 240V)
•The charge lamp blinks to indicate charging has started.
•When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera.
LTo detach the battery pack
Slide and hold BATT. ( step 2), then remove the battery pack.
LTo check the remaining battery power See page 18.
NOTES
•You can also use the camera with just the AC adapter.
•Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.
16