Other Settings

Lens Cover

Switch

Checking the Remaining Battery

Power

Preparation:

Set the power/mode switch to OFF.

Attach the battery pack.

BATTERY CONDITION

100%

 

MAX TIME

50%

min

INDEX0%

Battery information is displayed for approx. 5 seconds if the button is pressed and released quickly, and for approx. 15 seconds if the button is pressed and held for several seconds.

INDEX

Power/Mode Switch

NOTES

Grip Adjustment

Open the pad and make grip adjustments.

Lens Cover

When not using the camera, close the lens cover to protect the lens.

Close the lens cover

Open the lens cover

NOTE

Do not push the lens cover strongly. Doing so may cause damage to the lens.

If “COMMUNICATING ERROR” appears, there may be a problem with your battery. In such a case, consult your nearest JVC dealer.

The recordable time display should only be used as a guide. It is displayed in 10 minute units.

Tripod Mounting

Align the camera stud hole with the tripod stud, and the mounting socket with the screw, and then rotate the camera clockwise to mount it to the tripod.

Bottom of the

Camera

NOTE

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camera.

14