Warning Indications

 

 

Indication

 

 

 

 

 

 

 

 

 

 

Meaning/Action

 

 

 

 

 

 



 

 

 

• Displays the remaining battery power.

 

 

 

 

 

 

–

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Battery indicator)

High

Exhausted

 

 

 

• As the battery power comes close to nil, the battery

–

 

 

 

 

 

 

indicator blinks. When the battery power is exhausted,

 

 

 

 

power turns off automatically.

 

 

 

 

 

 

 

 

 

 

• Appears when the date/time is not set.

 

 

 

 

 

 

13

 

 

 

• The built-in clock’s rechargeable lithium battery is

12

SET DATE/TIME!

discharged, so the previously set date/time is erased.

 

Connect the camera to an AC outlet using the AC adapter

 

 

 

 

 

 

 

 

for over 24 hours to charge the clock’s lithium battery. Then

 

 

 

 

set the date/time.

 

 

 

 

 

 

 

LENS COVER

• Appears for 5 seconds after power is turned on in recording

–

 

 

 

mode if the lens cover is closed or when it is dark.

 

 

 

 

• Remove the card once and insert it again. If the error is

15

HDD ERROR!

not cancelled, replace the card with one that has been

 

guaranteed for correct operation.

 

 

 

 

 

 

 

MEMORY CARD

 

 

 

 

 

 

 

• Perform clean up to restore the capacity of the recording media.

50

ERROR!

• It is recommended to run check disk regularly on the PC,

 

 

 

 

 

 

 

 

providing that there is no data on the hard disk of the camera.

–

CHECK CARD’S WRITE

• Appears when you attempt recording when the write/erase

30

PROTECTION SWITCH

protection tab on the SD card is set to the “LOCK” position.

 

VIDEO MANAGEMENT

• The video management fi le is broken. Recovery is required

–

FILE IS BROKEN. TO

to record or play back video fi les. Move the set lever to ¡ /

 

RECORD/PLAYBACK

¢ to select [YES], then press down to recover the video

 

VIDEO, RECOVERY IS

management fi le.

 

 

 

 

 

 

 

REQUIRED. RECOVER?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAN NOT READ EVENT

• Appears when the event information cannot be read.

–

INFORMATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Performance of recording medium is poor. Use the Cleanup

50

 

 

 

function.

 

 

 

 

 

 

 

 

 

 

• The writing speed of recording medium is slow, or the

15

 

 

 

recording medium is corrupted. Use an SD card that is

 

 

 

 

guaranteed to operate.

 

 

 

 

 

 

 

RECORDING FAILURE

• The recording medium was subjected to vibrations or jolts.

–

 

 

 

Be careful not to subject the recording medium to vibrations

 

 

 

 

or jolts.

 

 

 

 

 

 

 

 

 

 

• Appears when the recording medium is full and recording

30

 

 

 

is not possible. Delete unnecessary files, or replace the SD

 

 

 

 

card.

 

 

 

 

 

 

 

 

 

 

• Appears when an incompatible USB device is connected to

–

INCOMPATIBLE USB

the camera.

 

 

 

 

 

 

 

• Appears when a DVD burner that is switched off is

–

DEVICE

connected. If you want to use the DVD burner, switch the

 

 

 

 

 

 

 

 

power on.

 

 

 

 

 

 

 

54