GETTING STARTED EN 19
GETTING STARTED
MasterPage: Start_Right
The brightness of the display can be adjusted.
1Set the power switch to or while
pressing down the lock button located on the
switch.
2Open the LCD monitor fully. (墌pg.9)
3Press MENU. The menu screen appears.
4Press / to select [DISPLAY], then press
49.
5Press / to select
[BRIGHT], and press 49.
The brightness control
indicator appears.
6Press / until the appropriate brightness
is reached.
7Press 49 to clear the brightness control
indicator from the display.
1Adjust the velcro strip.
2Pass your right hand
through the loop and grasp
the grip.
3Adjust your thumb and
fingers through the grip to
easily operate the
recording start/stop button,
power switch and zoom
lever. Be sure to fasten the
velcro strip to your
preference.
To attach the camera to a
tripod, align the direction
stud and screw to the
mounting socket and
stud hole on the camera.
Then tighten the screw
clockwise.
●Some tripods are not
equipped with studs.
Brightness Adjustment of the DisplayGrip AdjustmentTripod Mounting
M5E3US.book Page 19 Tuesday, August 9, 2005 1:50 PM