8 EN GETTING STARTED
MasterPage: Body_Left
Attaching the Shoulder Strap
Follow the illustration.
1Open the velcro strip.
2Thread the strap through the eyelet.
3Fold it back and thread it through the strap
guide and the buckle.
●To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
4Slide the strap guide fully towards the eyelet.
5Close the velcro strip.
Attaching the Lens Cap
To protect the lens,
attach the provided lens
cap to the camera as
shown in the illustration.
NOTE:
To confirm the lens cap is
on correctly, make sure the
cap is flush to the camera.
Attaching the Lens Protector
To protect the lens surface,
attach the provided lens
protector to the camera as
shown in the illustration.
1
4
5
2
3
Strap Guide
Buckle
Eyelet
Place here during
recording.
M5E3US.book Page 8 Tuesday, August 9, 2005 1:50 PM