Copying Files (Continued)

Using a VCR/DVD Recorder to Dub Files from the Camera

Preparation:

•Set [SWITCH TO ANALOG I/O] to [OUTPUT]. (Factory-preset = [OUTPUT])* ( pg. 63)

•Turn off all units.

*This does not apply to the GZ-MG360/330 model.

AV Jack

DC Jack

To AC

AC Adapter

 

Outlet

 

AV Cable

VCR/DVD Recorder

AV Input Jack

You can also connect the cables using the jacks on the Everio dock connectors. The S-Video or DV cable (optional) enables even higher dubbing quality. ( pg. 10) When other devices such as a DVD burner are connected to the Everio dock, turn the power of these devices off.*

*GZ-MG360/330 model does not include the Everio dock.

1 Set the VCR/DVD recorder to its AUX input mode.

2 Start playback on the camera.

•To play back videos ( pg. 27)

•To play back playlists (“When dubbing playlists using a VCR/DVD recorder”  pg. 37)

3 At the point you want to start dubbing, start recording on the VCR/ DVD recorder.

Refer to the VCR/DVD recorder’s instruction manual.

LTo stop dubbing

Stop recording on the VCR/DVD recorder, then press the START/STOP button again.

NOTE

To record only the date information among the display indications, set [DISPLAY ON TV] to [ON], and touch the OK button until date/time indication appears. ( pg. 65)

46