Still Image Recording
Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to MODE to select # (still image) mode.
MODE The switch returns
ENGLISH
Press the PLAY/REC button to select recording mode.
SELECT | 4:3 640 FINE [ 9 9 9 9 ] |
PLAY/REC | N |
|
ON
to the original position when it is
OFF
released.
The # lamp on the camera lights up.
8 To change the picture quality Change the settings in [QUALITY]. ( pg. 47)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to [ON]. ( pg. 48)
8 To change the image size Change the settings in [IMAGE SIZE]. ( pg. 47)
8 To take
Press the TELE MACRO button (t Indicator appears).
8 To record using the timer Press the z button several times to display the H (2 seconds) or I (10 seconds) indicator.
Press and hold the SNAPSHOT button halfway.
640 FINE [
The ? indicator becomes green when the captured image is focused.
Press the SNAPSHOT button to start recording.
40 FINE [ 9 9 9 9 ]
NOTE
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. To turn the camera on again when using the battery pack, set the power/mode switch to OFF, then to ON. When using the AC adapter, perform any operation such as zooming.
17