Changing the Menu Settings (Continued)

IMAGE #

GENERAL Y

Menus

 

 

 

Settings: [ ] = Factory-preset

 

 

 

 

 

2 GAIN

 

 

 

 

You can set the ISO setting to

[AUTO] / 50 / 100 / 200 / 400

increase the sensitivity in dark

 

 

 

 

conditions.

 

 

 

 

 

[OFF]: Disables the function.

 

ON: Activates the function.

 

BRACKETING: Activates the bracket shooting function.

 

 

In addition to an image with the exposure set by

 

 

the camera, two other images are recorded with

{ CONTINUOUS SHOOTING

 

exposure values shifted to the + 0.3 EV and – 0.3

 

EV sides. You can select the image that has a

Records still images continuously

 

suitable exposure after shooting.

while the SNAPSHOT button is

 

 

 

 

 

pressed.

 

NOTES

 

 

 

 

• The interval between recording still images is approx. 1.0

 

 

seconds.

 

• Continuous shooting may not work well depending on the

 

 

recording medium.

 

• The continuous shooting speed will drop if this function is

 

 

used repeatedly.

3 REC MEDIA FOR IMAGE

[HDD] / SD

Enables you to set the recording

medium for still images.

 

 

 

 

g BRIGHT

Adjust the brightness of the display moving the set lever

Enables you to set the brightness

to £ / ¤, then press down.

of the LCD monitor.

 

OFF: Disables the function.

^ DROP DETECTION

[ON]: Activates the function.

 

To turn the unit on when the drop detection worked, set

Prevents damage to the

 

the power/mode switch to OFF, and to ON again.

HDD by turning off the power

 

 

 

 

 

automatically when the camera

 

CAUTION

 

detects that it has been dropped.

Setting this function to off increases the chances of

 

damaging the built-in hard disk if the camera is accidentally

 

dropped.

] REMOTE

OFF: The camera does not receive the signal from the

Turns reception of the operation

 

remote control.

signal from the remote control

 

[ON]: Enables operation with the remote control.

on/off.

[ DEMO MODE

OFF: Disables the function.

Introduces special features of the

[ON]: Activates the function.

camera at the following cases.

 

 

 

 

• When the menu screen is

 

NOTES

 

• The demonstration only works when the DC cord is

closed.

• When there is no operation

 

connected, not with the battery.

for about 3 minutes during

• If an SD card is in the camera, demonstration will not take

recording mode.

 

place even if this mode is set to [ON].

\ OPERATION SOUND

OFF: Turns off the operation sound.

Enables you to set the operation

[MELODY]: The melody sounds when any operation is

sound or turn the operation

 

performed.

sound on/off.

 

 

 

 

 

 

 

 

 

 

48