Troubleshooting (Continued)
Recording
Playback
problems Other
Trouble | Action | |
| • Slide the mode switch to select the desired mode (! or #). | |
Recording cannot be | ||
performed. |
| |
| • If the camcorder temperature increases, REC fl ashes in the LCD | |
| monitor and recording stops automatically to protect the HDD. | |
| Turn off the camcorder, wait for a while, and start recording again. | |
| • Move away from a place where the camcorder is affected by | |
Recording stops by | excessive sound or vibration (such as a concert hall). | |
• A malfunction may occur in the HDD of the camcorder. In this | ||
itself. | ||
case, record to a microSD card. | ||
| ||
| • Insert a commercially available microSD card, and set each of the | |
| [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD]. | |
| • Recording stops automatically after 12 hours of continuous | |
| recording. | |
Sound or video are | • Sometimes playback is interrupted at the connecting section | |
interrupted. | between two scenes. This is not a malfunction. | |
| • Select [PLAYBACK MPG FILE] then search the video on the index | |
| screen. | |
Cannot find a recorded | (Video fi les that have damaged management information can be | |
played back.) | ||
video. | ||
• Cancel group display and date search functions. | ||
| ||
| • Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA | |
| FOR IMAGE]. (Files on other media are not displayed.) | |
| • Check the remaining battery pack charge. | |
The lamp does not flash | (When the battery pack is fully charged, the lamp does not fl ash.) | |
• When recharging in either a hot or cold environment, ensure that | ||
during battery pack | battery is being charged within the permitted temperature range. | |
charging. | ||
(If the battery pack is being recharged outside the permitted | ||
| ||
| temperature range, recharging may stop to protect the battery pack.) | |
When connecting to | • When connecting to the HDMI cable, the image or sound | |
may not appear on the TV properly depending on the TV | ||
the HDMI cable, the | ||
connected. In such cases, perform the following operations. | ||
image or sound does | ||
1) Disconnect the HDMI cable and connect it again. | ||
not appear on the TV | ||
2) Turn off and on the camcorder again. | ||
properly. | ||
| ||
|
| |
• TVs may operate differently depending on the specifi cations, | ||
not work properly, and | even if they are | |
the TV does not work | functions of the camcorder cannot be guaranteed to operate in | |
in conjunction with the | combination with all the TVs. In such cases, set [HDMI CONTROL] | |
camcorder. | to [OFF]. | |
|
|
If a malfunction occurs in the HDD
!Perform [FORMAT HDD]. (All data is deleted.)
#If this does not solve the problem, perform the disc check function from a PC after formatting. $ If this does not solve the problem, contact the JVC customer service for repairs.
To reset the camcorder when it does not operate normally
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it.
#Execute [FACTORY PRESET].
38EN