JVC GZ-MG730 manual 70

Troubleshooting (Continued)

Displays

Recording

	Trouble	Action	
		• Adjust the brightness and angle of the LCD monitor.	66
Images on the LCD
monitor appear dark or		• When the monitor backlight reaches the end of its service	–
		life, images on the LCD monitor become dark. Consult
whitish.
		your nearest JVC dealer.
Colored bright spots		• The LCD monitor is made with high precision technology.	–
		However, black spots or bright spots of light (red, green or
appear on the LCD		blue) may appear constantly on the LCD monitor. These
monitor.		spots are not recorded on the picture. This is not due to
		any defect of the unit. (Effective dots: more than 99.99%)
Aspect ratio of the		• Change the settings in [SELECT TV TYPE] to match	67
image is strange when		the aspect ratio of the image with the screen size of the
watching images on TV.		connected TV.
		• Recording medium is full. Delete unnecessary fi les or	33
Recording cannot be
performed.		replace the microSD card.
		• Select the recording medium properly.	64
Vertical lines appear on		• Such a phenomenon occurs when shooting a subject	–
recorded images.		illuminated by bright light. This is not a malfunction.
The LCD monitor		• Such a phenomenon occurs when shooting under direct	–
becomes red or black		sunlight. This is not a malfunction.
for an instant.
During recording, the		• Touch the DISP button once.	15
date/time does not
appear.
During video recording,		• The temperature of the camera is increasing. If the	–
the MREC indicator		camera continues to heat up, recording may be stopped
		to protect the recording medium. In this case, turn off the
flashes.		power, and then wait until the camera cools down.
The LCD monitor		• Certain modes of program AE and other functions that	–
indications blink.		cannot be used together are selected at the same time.
Digital zoom does not		• Change the settings in [ZOOM].	65
work.		• Digital zoom is not available in the still image recording	–
		mode.
The focus is not		• Set [FOCUS] to [AUTO].	26
adjusted automatically.		• Clean the lens and check the focus again.	73
		• Wait to become natural color. The camera adjusts the	–
		white balance automatically but it takes a time.
		• Try manual white balance adjustment.	27
The color of the image		• In bright places, setting [PROGRAM AE] to [NIGHT] or a	–
looks strange.		slow speed is not recommended.
		• When the recorded image is too dark, try backlight	26, 27
		compensation or adjust brightness.
		• When the recorded image is too bright, try adjust	26
		brightness.

70