Still Image Recording
Preparation:
•Open the LCD monitor to turn on the camcorder.
•Insert an SD card.
Slide the mode switch to select | Press PLAY/REC to select the |
# (still image) mode. | recording mode. |
ENGLISH
LTo view the last recorded image Select A after shooting.
Selecting * during playback deletes that image.
LTo change the image quality Change the settings in [IMAGE QUALITY]. (Z p. 56)
LTo record still images continuously Set to [CONTINUOUS SHOOTING] in [SHUTTER MODE]. (Z p. 55)
PLAY/REC | FINE [9999] |
|
Press and hold SNAPSHOT halfway.
The ? indicator becomes green when the captured image is focused.
Press SNAPSHOT fully to take a still image.
FINE
RECORDING/ PLAYBACK
NOTE
•DIS (Digital Image Stabilizer) does not function during still image recording.
•If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. To turn on the camcorder again when using the battery pack, close the LCD monitor and open it again. When using the AC adapter, perform any operation such as zooming.
21